Powerbronze

Welcome to Powerbronze Australia

Phone: 0430 535 716

The official site to Australia & NZ for all your Powerbronze motorcycle body work and accessories, including screens, huggers, mudguards, seat cowls, belly pans, and much more. Buy direct from the Australian agent for Powerbronze UK.
 
Gallery
 
Contact Us
 
menu trans
 
 
 
 
 
 
 
 
 
 
 
dash panel
DASH PANELS

Powerbronze "Dash Panels" are a lightweight, strong direct replacement for the original part. They give the same level of protection as the original equipment with the racing look of carbon fibre.

Our carbon fibre parts are pre-drilled and use your bike's original fasteners in most cases or a unique 3M Duo-Lock method, fittings are supplied where required. Manufactured from 3K Twill Prepreg Carbon Fibre weave & Finished with a UV resistant lacquer in either Gloss or Matt. TUV and ABE approved
.


Yoke
YOKE PROTECTORS

Powerbronze "Yoke Protectors" are the perfect way to prevent keys etc. from scratching your top yoke, while adding some superb Carbon Fibre detail to your bike.

Manufactured using a 2mm High Gloss Plain Weave Genuine Carbon Fibre Composite, Epoxy Resin system is used for maximum strength and UV stability to prevent fading.

Each Yoke Protector is CNC cut to precise spec's for a perfect fit with double sided adhesive for a simple peel and stick fitment.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.


front mudguard
FRONT MUDGUARDS

Powerbronze "Front Mudguard" is a lightweight, strong direct replacement for the original part. They give the same level of protection as the original equipment with the classy look of carbon fibre.

Our carbon fibre parts are very simple to fit, pre-drilled and use your bike's original fasteners in most cases. However fittings are supplied where required.

Manufactured from 3K Twill Prepreg Carbon Fibre weave & Finished with a UV resistant lacquer in either Gloss or Matt, most with mesh vents for extra styling.

Powerbronze items are all TUV and ABE approved where required.

Hugger
HUGGERS

Powerbronze "Carbon Rear Huggers" are manufactured as an option but only on a few suitable models all Powerbronze Huggers use "Posi-Flex"; steel sleeved rubber mounting points to dampen vibration and avoid cracking.

Some models are vented with the option of black, gold or silver coloured mesh vents for that extra style for your machine!

Powerbronze Carbon Fibre Huggers are hand made in our dedicated plant and lacquered to give a gloss or matt finish to protection from weathering. The Carbon Fibre range is manufactured with a lightweight and very robust 3K Twill Prepreg Carbon Fibre weave.

Most of the Powerbronze Carbon Rear Huggers do not incorporate chain guards into their design. If you wish to alter your existing chain guard when purchasing you may wish to check out our Carbon Fibre Chain Guards!

All Powerbronze Rear Huggers have TUV type approval.

Powerbronze are currently producing rear huggers for over 100 different models from Yamaha, Triumph, Ducati, BMW, Aprilia, Honda, Kawasaki, Suzuki, KTM & EBR etc. Please note: All Powerbronze Huggers are developed using the standard OEM tyre.


Heat Shield
HEAT SHIELDS

Powerbronze "Heat Shields" are a lightweight, strong and stylish direct replacement for the original plastic part.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Gloss Finish.

These Heat Shields will be pre-drilled and use your original fasteners in most case, or fittings are supplied where necessary.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.


side panel
SIDE PANELS

Powerbronze "Side Panels" are a lightweight, strong and stylish direct replacement for the original plastic parts & depending on the bike model there is sometimes multiple sections as the kit.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Finish.

Side Panels will use your original fasteners in most case, or fittings are supplied where necessary.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.

 

chain guard
CHAIN GUARDS

Powerbronze "Chainguards" are always manufactured using genuine Carbon Fibre as an option to your original plastic part.

The Powerbronze Chainguard will be pre-drilled and uses "Posi-Flex"; steel sleeved rubber mounting points to dampen vibration and avoid cracking.

Hand made in our dedicated plant and lacquered to give a gloss or matt finish (some models) to protection from weathering.

The Carbon Fibre range is manufactured with a lightweight and very robust 3K Twill Prepreg Carbon Fibre weave TUV type approval.

exhaust cap
EXHAUST END CAPS

Powerbronze "Exhaust End Caps" are a lightweight, strong and stylish direct replacement for the original plastic part.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Gloss Finish.

The Exhaust End Cap will be pre-drilled and use your original fasteners in most case, or fittings are supplied where necessary.

German TUV Approved. Only available for a few selected Kawasaki models, we can check your specific model requirements and calculate price.


clock surround
CLOCK SURROUNDS

Powerbronze "Clock Surrounds" are a lightweight, strong and stylish direct replacement for the original plastic parts.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Finish.

Clock Surrounds will use Double Sided Adhesive Tape to secure in most cases, or fittings are supplied where necessary.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.


spark plug cover
SPARK PLUG LEAD COVERS

Powerbronze "Spark Plug Lead Covers" are a lightweight, strong direct replacement for the original part and available for a few specific BMW models.

They give the same level of protection as the original equipment with the classy look of carbon fibre.These parts use your bike's original fasteners in most cases, and fittings are supplied where required.

Manufactured from 3K Twill Prepreg Carbon Fibre weave & Finished with a UV resistant lacquer in either Gloss or Matt, TUV and ABE approved.


B King Sprocket
B-KING SPROCKET COVER

Powerbronze "Sprocket Cover" is unique for the Suzuki B-King as a direct replacement for the original section.

Manufactured from carbon fibre, all mounting points have alloy bushes to allow firm fit without damaging the carbon fibre part.

Manufactured using High Gloss or Matt finish genuine Carbon Fibre, Epoxy Resin system is used for maximum strength and UV stability to prevent fading.

Only available for the B-King, we can calculate your delivered price.

T Covers
BMW R NINE T COVERS

Powerbronze specific "BMW R Nine T" Covers are all lightweight, strong direct replacements for the original parts.

In the range we manufacture Exhaust Valve Cover, Spark Plug Lead Cover, Bottom Cylinder Cover and the Intake End Cover. They give the same level of protection as the original equipment with the classy look of carbon fibre.

Simple to fit using your bike's original fasteners in most cases or fittings are supplied where required.

Manufactured from 3K Twill Prepreg Carbon Fibre weave & Finished with a UV resistant lacquer in either Gloss or Matt finish.

Powerbronze items are all TUV and ABE approved where required.


 

Powerbronze products are manufactured in UK, many of which, including our extensive range of motorcycle & scooter windscreens, meet or exceed the stringent German TUV and ABE type-approval specifications.

(C)2018 Powerbronze Australia - All Rights Reserved.