Powerbronze

Welcome to Powerbronze Australia

Phone: 0430 535 716

The official site to Australia & NZ for all your Powerbronze motorcycle body work and accessories, including screens, huggers, mudguards, seat cowls, belly pans, and much more. Buy direct from the Australian agent for Powerbronze UK.
 
Gallery
 
Contact Us
 
menu trans
 
 
 
 
 
 
 
 
 
 
 
crash post
CRASH POST KITS

Powerbronze "Crash Posts" are the ultimate accessory because while they are looking stylish and smart, they are protecting your valued investment at the same time.Designed to be used with extreme prejudice on the track.

On some models a specific logo Badge is supplied for the end of each Crash Post or Swing Arm Protector (these can be purchased separately if lost or damaged).

Manufactured from Hi-impact ABS Polycarbonate Plastic compound or machined from anodised CNC Aluminium Bar (not all models), these add protection to the sides & fairings of your bike. Strong yet stylish & easily fitted on most models with a specific supplied kit using de-embrittled high tensile bolts which are designed to "give" rather than snap off in the hole.

Crash Posts are available in Blue, Black, Gunmetal Grey, Red, Amber, Yellow, Lime, White or the Anodised Alloy available in Blue. Black, Polished Silver, Red, Green. On a few models the Fairing may require a 20mm hole for the spacer to be correctly located through the fairing. Can be purchased only in pairs, there might be matching Fork Protectors and Swing Arm Protectors also available for the same model.



fork protector
FORK PROTECTORS

Powerbronze "Fork Protectors" are a good investment for the protection offered. On some models a specific logo Badge is supplied as an end cover for the Fork Protector (these can be purchased separately if lost or damaged) or they are supplied with a Powerbronze Logo end cover badge.

Injection moulded from high impact ABS plastic, each pair of Swing Arm Protectors is supplied with all the necessary high tensile studs, washers, nuts and compression sleeves to suit each model along with fitting instructions.

The shape allows these to be used as paddock stand bobbins. Available in Blue, Black, Gunmetal Grey, Red, Amber, Yellow, Lime, White. There might be matching Swing Arm Protectors and Crash Posts also available for the same model.


swing arm protector
SWING ARM PROTECTORS

Powerbronze "Swing Arm Protectors" are another important part of protecting your valued investment.

On some models a specific logo Badge is supplied as an end cover Swing Arm Protector (these can be purchased separately if lost or damaged) or they are supplied with a Powerbronze Logo end cover badge

Injection moulded from high impact ABS plastic, each pair of Swing Arm Protectors is supplied with all the necessary high tensile studs, washers, nuts and compression sleeves to suit each model along with fitting instructions.

The shape allows these to be used as paddock stand bobbins. Available in Blue, Black, Gunmetal Grey, Red, Amber, Yellow, Lime, White.

There might be matching Fork Protectors and Crash Posts also available for the same model.


chain guard
CHAIN GUARDS

Powerbronze "Chainguards" are manufactured using genuine Carbon Fibre as an option to your original plastic part.

The Powerbronze Chainguard will be pre-drilled and uses "Posi-Flex"; steel sleeved rubber mounting points to dampen vibration and avoid cracking.

Hand made in our dedicated plant and lacquered to give a gloss or matt finish (some models) to protection from weathering.

The Carbon Fibre range is manufactured with a lightweight and very robust 3K Twill Prepreg Carbon Fibre weave TUV type approval.


cooler grill
COOLER GRILLS

Powerbronze "Cooler Grills" are truly a delight to finish and protect your radiator. Lightweight, strong and stylish directly mounts over the radiator

Cooler grills are designed to enhance your machine's appearance and protect your vulnerable radiator from being damaged by debris thrown up by the front wheel. Our cooler grills require no modification to fit and cost much less than a new radiator.

Simple to fit. Supplied with all required fittings and full instructions.

A Powerbronze Cooler Grill gives the choice of Shiny Stainless Steel or Black powder coated and on a few selected models available in a toughened Acrylic with colours Red, Blue, Electric Blue, Fluorescent Green, Gloss Black or Matt Black, White, Amber.

We can check your specific model requirements and calculate price
.
end cap
EXHAUST ENDS

Powerbronze "Exhaust End Caps" are a lightweight, strong and stylish direct replacement for the original plastic part.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Gloss Finish.

The Exhaust End Cap will be pre-drilled and use your original fasteners in most case, or fittings are supplied where necessary.

German TUV Approved.

Only available for a few selected Kawasaki models, we can check your specific model requirements and calculate price.

 

side panels
SIDE PANELS

Powerbronze "Side Panels" are a lightweight, strong and stylish direct replacement for the original plastic parts & depending on the bike model there is sometimes multiple sections as the kit.

These parts are manufactured in Hi-Impact ABS Polycarbonate Plaastic or Carbon Fibre. Side Panel parts give the same level of protection as the original part with the enhanced appearance of quality 3mm ABS in Gloss Black, Matt Black, Carbon Look or White and for some models a Gloss or Matt finish Carbon Fibre & a few have decorative mesh vents.

Side Panels will use your original fasteners in most case, or fittings are supplied where necessary.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.
heel plate
HEEL PLATES

Powerbronze "Heel Plates" are beautifully made & detailed from lightweight, strong Carbon Fibre.

A direct replacement for the original part and fitting is simple by using your original fixture kit.

Our Carbon Fibre Heel Plates retain the rigidity of the OEM parts whilst offering a significant weight reduction and adding to the overall look of your bike.

With over 30 models in our range, Carbon Fibre Heel Plates are the perfect complimentary piece to any other Powerbronze Carbon Fibre product.

TUV & ABE approved.

heat shields
HEAT SHIELDS

Powerbronze "Heat Shields" are a lightweight, strong and stylish direct replacement for the original plastic part.

These Carbon Fibre parts give the same level of protection as the original part with the enhanced appearance of a Carbon Fibre Gloss Finish.

These Heat Shields will be pre-drilled and use your original fasteners in most case, or fittings are supplied where necessary.

Only available for a few selected bikes, we can check your specific model requirements and calculate price.

TUV approved where required.

hand guard
HAND GUARDS

Powerbronze "Hand Guards" are designed in our UK Manufacturing plant help to keep down the air blast hitting the rider and guard against wind and weather conditions, they offer more protection than standard hand guards.

Manufactured from Hi-Impact ABS Polycarbonate Plastic, Powerbronze Hand Guards are available in Gloss Black, Matt Black, Carbon Look & White (where applicable) and with Black anodised aluminium Powerbronze bar ends .

Supplied with a full fitting kit and specific instruction sheet.

 

Powerbronze products are manufactured in UK, many of which, including our extensive range of motorcycle & scooter windscreens, meet or exceed the stringent German TUV and ABE type-approval specifications.

(C)2018 Powerbronze Australia - All Rights Reserved.